Is Car Window Tinting Good for You?
Best Car Window Tinting
Have you ever tinted your car windows? Then you would probably know that nothing ruins the aesthetic of a gorgeous car like a bad tint job. Though worse than these is that is still trying to see through that ruinously bad streak of bubbles between the window and the translucent purplish film that was once the best car window tint.
However, you won’t realize it now but after years of going without tint and in soaring temperatures of 120-130oF! So, if your car also needs a tint too then you can head straight to the best shop of window tint in Woodbridge to get it done. Whether you are checking out a used car or having yours tinted for the first time, there are some things that you should know.
Good Tint Has Small, Clean Edges
In order to tell if a car has a quality tint, you need to see how close the film comes to the window edge and take a note of how consistent and clean the line is. The best window tint installer uses computerized templates that pre-cut the film as much as possible, resulting in a line that’s close to the edge of the window pane.
Purple is the Enemy
The biggest problem with window tints is it turns purplish with time. That is obvious that the film is of the most basic quality possible which is a vinyl sheet with dyes that fade over time.
Look for Tiny Bubbles
You can make sure to check out how clear your view is. While installing the window tint, bubbles can appear and even small bubbles can cause distortion. A good tint installer will minimize the risk of bubbles but if you have used a low-quality tint, they can form as early as six months the adhesive starts to break down prematurely.
Check out the Dot Matrix
Some of the window tints have little dots on the edges of the car windows are 3D and makes window tinting very difficult because it sticks to some spots but not others. Sometime, an installer will attempt to fill the blank spaces with glue so it looks filled in.
However, a better and more intensive solution is for the installer to take time and sand the dots down.
Look for Bubbles Around Defroster Bars
As with the dot matrix, your read window’s defroster is 3D. Any access gap where the tint is firmly affixed to the windows will become an excellent starting point for bubbles to form and expand over time. So, you will need to make sure that the tint is pressed as tightly against the defroster as possible.
High-Quality Tints Aren’t Always Dark
Don’t assume that a dark tint has the best heat-blocking properties. While the car is in the sun, put one hand directly in the sun and other behind the window, you will surely feel the difference. As a general rule, the darker the tint, the greater the heat reduction, but a high-quality ceramic tint is more efficient, meaning a lighter shade can still be more effective.